Cleaning of Aircraft & Jet Engines
Offering a wide selection of automatic aqueous parts washers for degreasing, cleaning and remove debris from aircraft & Jet engines.
Turntable Washer for Aircraft Engine Parts
This turntable washer (Model HD 152) cleans; the center bodies of P&W series 4000 engines, or equivalent. Large diameter engine parts like air intakes, housings, combustion chambers, fan and turbine disks.
- Environmentally friendly - no solvents. Bio-degradable commercial detergents only.
- Re-circulating principle - water-based cleaning solutions conserve energy, detergent and water.
- Power spray principle - produces high-quality and high-speed cleaning.
- Low chemical cost - 3 to 7% detergent in water.
- Low energy cost - spray cabinet and tanks fully insulated, programmable heating systems.
- No health hazard to workers.
- 4-stage cleaning process (Parts free of oil, grease, dust and dirt)
- Alkali wash
- Fresh water rinse
- Recirculating rinse
- Air blow-off
- 3 applications in one machine
- cleaning of center bodies vertically rotating in special fixture
- cleaning of ring-shaped and cylindrical engine parts with robotic spray manifold
- fan and turbine disks, blades and vanes
- PLC controls allow for multiple cleaning programs and quick diagnostics
- Zero-discharge process (No effluent to sewers – no environmental impact)
- Re-circulating principle (Conservation of water, energy and detergent)
- Thermal insulation of machine and 7-day heating program (Energy conservation)
Turntable Washer to clean Jet Engine Parts
- Model HD 62
- For cleaning prior to inspection of GE, P&W, RR jet engine parts
- 3-stage process
- Degreased and clean parts
- Recirculated alkali wash
- Non-recirculated fresh water rinse
- Recirculated rinse
- Oscillating center nozzle pipe sprays the insides of cylindrical parts
- Zero-discharge process (No effluent to sewers – no environmental impact)
- Re-circulating principle. (Conservation of water, energy and detergent
- Thermal insulation of machine and 7-day heating program
Washer with Auto-Loader for Aircraft Engine Parts
For cleaning and removing buffing compounds from Nickel alloy and titanium engine parts. Parts dry via compressed air blow-off, parts will air dry within minutes.
- 3-stage process
- Alkali wash
- Fresh water rinse
- Air blow-off
- Automatic loading system eliminates continuous operator attendance
- Two-level turntable. increases production capacity
- Special spray manifold optimises spray exposure of parts
- Automatic extraction of sludge and chips from wash tank – extends tank life
- Zero-discharge process (No effluent to sewers – no environmental impact)
- Re-circulating principle (Conservation of water, energy and detergent)
- Thermal insulation of machine and 7-day heating program
Model | HD 152 | HD 62 | FTT 62 |
---|---|---|---|
Turntable diameter | 3.8m | 1.6m | 1.6m |
Height | 2.7m | 1.2m | 1.5m |
Turntable load capacity | 2,250 kg | 900 kg | 1,100 kg |
Wash tank volume | 3,850 litres | 2,100 litres | 2,300 litres |
Connected power | 460V - 3PH - 60Hz - 130A / 380V - 3PH - 50Hz - 160A | 600V - 3PH - 60Hz - 90A / 380V - 3PH - 50Hz - 140A | 230V - 3PH - 60Hz - 200A / 380V - 3PH - 50Hz - 120A |
Floor space requirement | 18’ W × 39’ L / 5,5 m W × 12.0 m L | 9’ W × 16’ L / 2,7 m W × 4,8 m L | 10’ W × 17’ L / 3,0 m W × 5,0 m L |